LPG Autogas Tanks

LPG
Autogas tanks are means of LPG storage at service and distribution stations, serving motor vehicles running on auto LPG. Auto LPG is an environment friendly alternative fuel for vehicles. Local regulations of a country determines whether the tanks shall be installed above ground or under ground. Our manufacturing standards are EN 12542, EN 13445 and PED. Upon customer’s requirements design…

EXPLORE LPG TANKS

Autogas tanks are means of LPG storage at service and distribution stations, serving motor vehicles running on auto LPG. Auto LPG is an environment friendly alternative fuel for vehicles. Local regulations of a country determines whether the tanks shall be installed above ground or under ground.

Our manufacturing standards are EN 12542, EN 13445 and PED. Upon customer’s requirements design and manufacturing can be done according to AD2000 – Merkblatter, ASME, CODAP, BS5500 or other standards.

THE HIGHLIGHTS OF ISISAN TANKS ARE

  • Manufacturing and testing of the tanks are made under supervision of an independent inspection body.
  • CE marking is provided. Upon customer’s requirement, ASME U or U2 stamps can be provided.
  • Shell and heads are manufactured from P355 quality, fine grain pressure vessel steel according to EN10028-3 standard.
  • Metallurgical and mechanical properties of steels are tested and verified.
  • All welded joints are tested according to the manufacturing standard. A combination of X-ray, ultrasonic, dye penetrant and magnetic particle tests are utilized.
  • After manufacturing, all tanks are subjected to hydrostatic pressure test. After this test, the connections of tank accessories are tested against leaks, using nitrogen.
  • Tanks are sand blasted and coated with premium quality paints. The right type and thickness combination of primer, undercoat and top coating are determined according to the above ground or under ground service. Isısan quality will offer highest performance during the whole service life of tank.

SPECIFICATION

General Specification

 Design Temperature –20°C / +50°C
 Design Pressure 17 bar
 Test Pressure 24,4 bar
 Head Type Ellipsoidal

Standard Tank Volumes

3 m3
5 m3
7 m3
10 m3
22 m3
35 m3
50 m3

Standard nozzle configuration for autogas tanks are as follows. Upon customer’s requirement, additional nozzles or special details can be manufactured (e.g. double suction line or submersible pump application).

Tank Accessories (3 m3– 10 m3) – Standard

DescriptionQuantitySize
Inspection hole1 Pc.DN200
Liquid return2 Pc.1 ¼” NPT
Liquid inlet1 Pc.1 ¼” NPT
Pump inlet1 Pc.DN50
Drain1 Pc.DN25
Safety relief valve1 Pc.2” NPT
Pressure gauge1 Pc.¾” NPT
Magnetic level gauge1 Pc.Special

Tank Accessories (22 m3– 50 m3) – Standard

DescriptionQuantitySize
Manhole1 Pc.DN400
Liquid return2 Pc.1 ¼” NPT
Liquid inlet1 Pc.1 ¼” NPT
Pump inlet1 Pc.DN50
Drain1 Pc.DN25
Safety relief valve1 Pc.2” NPT
Pressure gauge1 Pc.¾” NPT
Magnetic level gauge1 Pc.Special